TDN 5-0911WI

DC/DC Converter TDN 5WI Series, 5 Watt • Ultra compact DIP package 13.2 x 9.1 x 10.2 mm • • • I/O-isolation 1'600 VDC • • • • Short circuit protection Fully regulated outputs Operating temperature range -40°C to +75°C Remote On/Off 3-year product warranty Designed to meet UL 62368-1 (UL 60950-1) The TDN 5WI Series redefines the power density of high performance DC/DC converters. The cubical package of only 1.23 cm³ encloses a sophisticated circuit which provides 5 Watt output power without any compromise regarding reliability and functionality. They operate up to 50°C environment temperature at full load or up to 70°C with a 50% load de-rating. With 1'600 VDC I/O-isolation voltage, external On/Off and short current protection, they cover a wide range of application when space is limited. The input of the converters is designed for a wide voltage range (4:1) and minimum load is not required. The functional I/O-isolation system is designed to meet IEC/EN 62368-1 with a test voltage (60 s) of 1'600 VDC. Models Order Code Input Voltage Range TDN 5-0910WI TDN 5-0911WI TDN 5-0919WI TDN 5-0912WI TDN 5-0913WI TDN 5-0915WI TDN 5-0921WI TDN 5-0922WI TDN 5-0923WI TDN 5-2410WI TDN 5-2411WI TDN 5-2419WI TDN 5-2412WI TDN 5-2413WI TDN 5-2415WI TDN 5-2421WI TDN 5-2422WI TDN 5-2423WI TDN 5-4810WI TDN 5-4811WI TDN 5-4819WI TDN 5-4812WI TDN 5-4813WI TDN 5-4815WI TDN 5-4821WI TDN 5-4822WI TDN 5-4823WI www.tracopower.com 4.5 - 13.2 VDC (9 VDC nom.) 9 - 36 VDC (24 VDC nom.) 18 - 75 VDC (48 VDC nom.) Output 1 Output 2 Vnom Imax 3.3 VDC 5 VDC 9 VDC 12 VDC 15 VDC 24 VDC +5 VDC +12 VDC +15 VDC 3.3 VDC 5 VDC 9 VDC 12 VDC 15 VDC 24 VDC +5 VDC +12 VDC +15 VDC 3.3 VDC 5 VDC 9 VDC 12 VDC 15 VDC 24 VDC +5 VDC +12 VDC +15 VDC 1'000 mA 1'000 mA 555 mA 420 mA 333 mA 210 mA 500 mA 210 mA 168 mA 1'000 mA 1'000 mA 555 mA 420 mA 333 mA 210 mA 500 mA 210 mA 168 mA 1'000 mA 1'000 mA 555 mA 420 mA 333 mA 210 mA 500 mA 210 mA 168 mA November 30, 2022 Vnom Efficiency Imax –5 VDC –12 VDC –15 VDC 500 mA 210 mA 168 mA –5 VDC –12 VDC –15 VDC 500 mA 210 mA 168 mA –5 VDC –12 VDC –15 VDC 500 mA 210 mA 168 mA typ. 76 % 80 % 81 % 83 % 83 % 83 % 80 % 83 % 83 % 76 % 80 % 81 % 83 % 83 % 83 % 80 % 83 % 84 % 76 % 81 % 81 % 83 % 83 % 83 % 80 % 83 % 84 % Page 1 / 4 TDN 5WI Series, 5 Watt Input Specifications Input Current - At no load 9 Vin models: 24 Vin models: 48 Vin models: 9 Vin models: 24 Vin models: 48 Vin models: 9 Vin models: 24 Vin models: 48 Vin models: 9 Vin models: 24 Vin models: 48 Vin models: Surge Voltage Reflected Ripple Current Recommended Input Fuse Input Filter 80 mA typ. 30 mA typ. 15 mA typ. 15 VDC max. (1 s max.) 50 VDC max. (1 s max.) 100 VDC max. (1 s max.) 40 mAp-p typ. 20 mAp-p typ. 15 mAp-p typ. 2'500 mA (slow blow) 1'250 mA (slow blow) 630 mA (slow blow) (The need of an external fuse has to be assessed in the final application.) Internal Capacitor Output Specifications Voltage Set Accuracy Regulation - Input Variation (Vmin - Vmax) - Load Variation (0 - 100%) Ripple and Noise Capacitive Load - Cross Regulation (25% / 100% asym. load) - 20 MHz Bandwidth - single output - dual output Minimum Load Temperature Coefficient Start-up Time Short Circuit Protection Transient Response ±1% max. 0.2% max. 0.2% max. 1% max. 1% max. (Output 1) 1% max. (Output 2) dual output models: 5% max. single output models: dual output models: single output models: dual output models: 3.3 Vout models: 5 Vout models: 9 Vout models: 12 Vout models: 15 Vout models: 24 Vout models: 5 / -5 Vout models: 12 / -12 Vout models: 15 / -15 Vout models: - Response Time 75 mVp-p typ. 4'400 µF max. 2'200 µF max. 1'470 µF max. 1'220 µF max. 1'000 µF max. 470 µF max. 1'000 / 1'000 µF max. 680 / 680 µF max. 440 / 440 µF max. Not required ±0.02 %/K max. 10 ms typ. / 20 ms max. Continuous, Automatic recovery 500 µs typ. (25% Load Step) Safety Specifications Safety Standards Designed for EN 62368-1 (no certification) - IT / Multimedia Equipment EMC Specifications EMI Emissions - Conducted Emissions - Radiated Emissions EN 55032 class A (with external filter) EN 55032 class B (with external filter) EN 55032 class A (with external filter) EN 55032 class B (with external filter) External filter proposal: www.tracopower.com/overview/tdn5wi All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com November 30, 2022 Page 2 / 4 TDN 5WI Series, 5 Watt EMS Immunity - Electrostatic Discharge - RF Electromagnetic Field - EFT (Burst) / Surge - Conducted RF Disturbances - PF Magnetic Field Air: EN 61000-4-2, ±8 kV, perf. criteria A Contact: EN 61000-4-2, ±6 kV, perf. criteria A EN 61000-4-3, 10 V/m, perf. criteria A EN 61000-4-4, ±2 kV, perf. criteria A EN 61000-4-5, ±1 kV, perf. criteria A Ext. input component: KY 220 µF, 100 V EN 61000-4-6, 10 Vrms, perf. criteria A Continuous: EN 61000-4-8, 100 A/m, perf. criteria A 1 s: EN 61000-4-8, 1000 A/m, perf. criteria A General Specifications Relative Humidity Temperature Ranges 95% max. (non condensing) –40°C to +75°C +105°C max. –55°C to +125°C Power Derating Depending on model See application note: www.tracopower.com/overview/tdn5wi Cooling System Natural convection (20 LFM) Remote Control On: open circuit - Current Controlled Remote Off: 2 to 4 mA current (no internal resistor) External circuit proposal: www.tracopower.com/info/current-remote.pdf 2.5 mA max. - Off Idle Input Current Switching Frequency 100 kHz min. (PFM) Insulation System Functional Insulation Isolation Test Voltage 1'600 VDC - Input to Output, 60 s Isolation Resistance 1'000 MΩ min. - Input to Output, 500 VDC Isolation Capacitance 50 pF max. - Input to Output, 100 kHz, 1 V Reliability - Calculated MTBF 2'960'000 h (Vin models) 2'280'000 h (other models) (MIL-HDBK-217F, ground benign) Washing Process Allowed (hermetical product) See Cleaning Guideline: www.tracopower.com/info/cleaning.pdf Environment MIL-STD-810F - Vibration MIL-STD-810F - Thermal Shock Housing Material Non-conductive Plastic (UL 94 V-0 rated) Base Material Non-conductive Plastic (UL 94 V-0 rated) Potting Material Silicone (UL 94 V-0 rated) Pin Material Copper Pin Foundation Plating Nickel (2 - 3 µm) Pin Surface Plating Tin (3 - 5 µm), matte Housing Type Plastic Case Mounting Type PCB Mount Connection Type THD (Through-Hole Device) Footprint Type DIP8 Soldering Profile 260°C / 6 s max. Weight 2.7 g www.tracopower.com/info/reach-declaration.pdf Environmental Compliance - REACH Declaration REACH SVHC list compliant REACH Annex XVII compliant www.tracopower.com/info/rohs-declaration.pdf - RoHS Declaration Exemptions: 7a, 7c-I (RoHS exemptions refer to the component concentration only, not to the overall concentration in the product (O5A rule). The SCIP number is provided on request.) - Operating Temperature - Case Temperature - Storage Temperature - High Temperature All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com November 30, 2022 Page 3 / 4 TDN 5WI Series, 5 Watt Supporting Documents Overview Link (for additional Documents) www.tracopower.com/overview/tdn5wi Outline Dimensions 13.2 (0.52) 9.9 (0.39) 5.08 (0.2) (3 x 0.08) 3 x 2.0 1 2 Pinout 5 6 7 9.1 (0.36) 10.2 (0.40) 4 4.5 (0.18) bottom viev 0.6x0.25 (0.024x0.01) Dimensions in mm (inch) Tolerances: x.x: ±0.5 (±0.02) Pin pitch tolerances: ±0.25 (±0.01) Pin diameter: ±0.1 (±0.004) © Copyright 2022 Traco Electronic AG Pin Single Dual 1 +Vin (Vcc) +Vin (Vcc) 2 –Vin (GND) –Vin (GND) 4 Remote On/Off Remote On/Off 5 NC –Vout 6 –Vout Common 7 +Vout +Vout NC: Not Connected Specifications can be changed without notice. www.tracopower.com Rev. November 30, 2022 Page 4 / 4